When complete with T Tables, press (F1) Save then (F1) Save again to return for Talkgroup Objects Note: if more tables are required repeat steps 22 through 26) SEL again and Key in 1st Lo Chan: then F1 21.ĝown through Expert for Type MOT VHF/UHF stop at T Tables: then Rt button to Custom.Lo Chan and Offset values are always the same. The final Hi Chan should always be channel 759. When subsequent channels are needed, the Hi Chan of previous table is always one number less then next table Lo Chan. Generally the first Lo Chan is always 380 and the last channel is 759. For Motorola VHF/UHF system Types, key in T Tables.As in step 8 key in up to 16 character alpha tag for Talkgroup Object 18.ĝown to Tag: OD: Wildcard flashing then SEL then FUNC CLR.After second (F1) Save in step 14 use Down to ID: Wildcard press SEL then FUNC CLR If Talkgroup Objects are known ignore Note in step 14 and move to step 16 (F1) Save again Note: If no known talkgroup objects are available, press (F1) Save twice more then press scan to use the selected system with its Wildcard Object (F1) Save Note: if system is not MOT VHF/UHF, press (F1) Save again and move to TG Object section if system is MOT VHF/UHF go to step 21 and program custom T Table(s) Down to next and key in frequency (repeat this step until all are entered) Key in 1st frequency then press ENT Note: Motorola and P25 systems require only controls and alternate controls to be programmed while EDACS and LTR systems require all frequencies and must be listed in LCN position. Note: R and L arrow will shift prompt for space or to move back to change a letter. Press numbered key under alpha letters to select letter then press either number 1, 2, 3 or 4 as indicated on top line which will place the letter at prompt on line 3 of display. 7.ĝown to Tag: System then SEL then FUNC CL(R) for clearing system for up to 16 character alpha tag entry.Use default MOT 800/900 or right key (repeatedly) to change type Note: (P25 should be set to Auto so tables will populate automatically when Control Channel (CC) decodes data Set scanlist # (default is *1) use SEL to toggle list *1 off then right key to change list to another list then press SEL to toggle * next to list number Trunking w/ Analog Voice Only scanners, others shown in table can handle up-to Digital P25 Phase IĪlways set Scanlist as outlined in step 4 with the (*) star key.This document covers several models from GRE, Radio Shack and Whistler, all of which share basically the same functionality
0 Comments
Leave a Reply. |